• Clean the skimmer and pump basket regularly.
• Brushing of walls, steps, ladder and low circulations spots on daily basis.
• Maintaining of water level between one-third and one-half up to the swimming pool skimmer box.
• Checking of Potential of hydrogen (Ph) and chlorine.
• Vacuuming pool – to help your pool’s Ph level more controlled.
• Leaf and debris removal.

• Clean up any buildup of sludge at the base of chlorine and pH dosing equipment.
• Dismantle and clean the suction strainers and foot valves of chlorine and PH dosing equipment.
• Clean pump filters.
• Where not automatic rotate duty/standby pumps.
• Carry out an audio-visual check on all motors and pumps in plant room. Checking that they are operating correctly are not overheating, not leaking and are vibration free.
• Check all underwater lighting and replace any fused lamps.
• Generally clean plant room including all pipe work and equipment there in.
• Carry out any cleaning, adjustments, repairs or replacement as condition found in various checks dictates.
• Complete all plant log sheets.

Additional services will be included for two weekly maintenance.
• Dismantle points of application of chlorine/PH dosing equipment and thoroughly cleanse in water.
• Dismantle valve assembles of chlorine/ PH dosing pumps and thoroughly cleans in water.
• Super Chlorination – to ensure proper sanitization of the pool water and will prevent bacteria and alga growth.

Additional services will be included on monthly maintenance.
• Check integrity of ladders, grab handles, diving boards and the like fixed furniture and equipment.
• Check frequency of collection and submission of pool water samples for bacteriological analysis. Details as below:
➢ Checking of total Alkalinity, which should range between 80-120p.p.m
➢ Checking of calcium hardness, which should range between 180-220p.p.m
➢ Checking of chlorine level, which should rage between 1-4p.p.m
➢ Checking of bromine level, should range between 3-5p.p.m
➢ Checking of Cyanuric Acid level, which should range between 30-50p.p.m
➢ Checking of Potential of hydrogen, should range between 7.2-7.6p.p.m

Additional services will be included in Three monthly maintenance.
• Check condition of skimmer cover plates, skimmer weir and skimmer basket.
• Check condition integrity of pump “O” rings, strainer baskets mechanical seals and couplings.
• Check condition and integrity of chemical dosing pump diaphragms, valve seals valve shutters, foot valves, suction trainers and “O” rings.
• Check condition and integrity of filters back wash sight glass, air relief valves and pressure gauges.
• Generally, check all electrical controls and devices for integrity and correct operation.
• Carry out any cleaning adjustments, repair or replacement as condition found in various check dictates and complete all planned log sheets.

Additional services will be included in six monthly maintenance.
• Remove circulating pumps and check motor bearings and insulation resistance of motor winding (if required).
• Check and clear/clean pump impeller.
• Replace seals (if required).
• Undertake any other repairs, cleaning, adjustments or replacement us dictates by condition of pumps and plant room equipment.
• Reinstall pumps (if required).
• Complete log sheets and log book.

• Drain down swimming pools complete and thoroughly clean all wall and floor areas taking particular care and using algaecides or similar as required to kill/remove any buildup of algae or fungus particular in title joins.
• Inspect all surfaces for and replace any damaged, loose or missing tiles.
• Inspect tile joins and re point with approved epoxy-based grout as conditions dictates.
• Remove sand / filter media from filter.
• Check condition of filter nozzles and replace as condition dictates.
• Check inside filter body for and clean back to bare metal any signs of rust or corrosion. Prime all bate metal, prepare and paint inside and outside of filter unit.
• Clean filter media and refill filter and top up or replace with proper silica sand filter media as condition dictates.
• Check all pipe work for signs of leakage, adjust repair or replace as required.
• Drain water from back wash holding tank remove all accumulated sand and sludge thoroughly clean walls and floor and check for deterioration.
• Remove pumps and motors and undertake annual overhaul including the following:
➢ Remove and strip down motor and pumps.
➢ Check suction, delivery and non-return valves.
➢ Check mechanical seals, O rings, bearings and gaskets.
➢ Check motor windings.
➢ Check condition of impeller, impeller casing and the like.
➢ Adjust, repair or replace items as condition dictates.
➢ Re-vanish windings or rewind motor as condition dictates.
• Prepare and paint all sections where existing paint has flaked, is damaged or where there are any signs of rust or corrosion.
• Re-assemble motor and pump using new gaskets and scaled as required, test and reinstall.
• After all works complete thoroughly clean pool, refill pool and all chemical dosing pots, re-commission all paint equipment and run plant for 48 hrs. Keeping pool closed.
• Carry out full pool water chemical analyses to check condition of water.
• Keep pool closed and carrying out subsequent checks until water quality proved to meet required standards.
• Co-ordinate with civil maintenance to perform to do the following:
➢ Checking general structure.
➢ civil elements of the pools for soundness.
➢ touch up paint / repair mosaics and make good as required.
➢ Shutting down the swimming pool for annual maintenance prepares and paint walls and floors of painted features with paint systems to match existing.